亚洲无码特级一级片_看国产精品美女黄片_av不卡无码免费播放_国产精品原巨作AV无遮挡

86-15237383444
EXPLAIN

Processing Instructions Of Loom Reeds

Release:hnfzpj Click:13976

Processing instructions of Loom reeds: Loom reeds are used on Loom for orderly arrangement of warp yarns and equal order division of warp yarn density of weaving cloth surface. The reeds used on manual wood looms need to increase the length of through teeth (reeds expose wood strips) properly to facilitate the fixation of clamping slots on old wood Loom. Due to the design of Loom reed processing equipment and the limitation of wire arm, The length of the teeth on both sides of the textile reed varies by approximately 1-2mm.

Textile reed

The height of the Loom reed can be processed to 11.5-14cm. The two sides of the (semicircular) batten on the Loom buckle are shown in the following figure:

Processing dimensions of textile reeds

The tooth length of the steel reed on the wooden loom can be processed to approximately 9.3mm on the left side and 8mm on the right side, as shown in the following figure:

Textile reed exposed teeth

This kind of Loom reed generally has a length of about 50 cm. The processing drawing of the finished Loom reed is as follows:

The teeth of reeds in manual Loom

The processing of reeds on profiled Loom is slow and the technical requirements are strict. The products need to be processed with thin reed teeth (sheets) during the processing, which is convenient for manual weaving. If you want to know the detailed processing technology of Loom reeds, please contact our company for consultation.

FriendLink: BaiDu  Ecer  Xinda Textile  Ec21  Ecplaza  Chinatexnet  Every China  
Copyright © 2016 Xinxiang City Xinda Textile Machinery Parts Co. Ltd 【MANAGE】
ADDRESS:5F West, Unit 53A, Zone A, Huicheng Port Bay, Huixian City, Henan Province,China CONTACT:Mr Yang MOBILE:86-15237383444
TEL:+86-0373-6235050 FAX:+86-0373-6235050 E-MAIL:309816745@qq.com
WEB:http://www.fcbergquistphotos.com
SERVICE
CUSTOMER ONE:
點(diǎn)擊這里
CUSTOMER TWO:
點(diǎn)擊這里
TEL:0373-6235050