亚洲无码特级一级片_看国产精品美女黄片_av不卡无码免费播放_国产精品原巨作AV无遮挡

86-15237383444
1511 Textile Machine Parts
Ductile Iron Parts B1/2 Warp Beam Foot
Ductile Iron Parts B1/2 Warp Beam Foot time:2022-07-07 11:37:11 click:5571 keywords:Warp beam foot, loom nodular iron, textile accessories
description:

Huixian Xinda Textile machinery accessories (formerly Xinxiang Xinda Textile accessories) is engaged in the sales of shuttle textile accessories B1/2 warp beam loom nodular iron accessories. There should be a gap of 0.8-1.6 mm between the height of loom warp bearing feet B1 and B2 and the upper part of back rail P5. The lower part of warp shaft bracket should be close to the outer edge of the wall panel, and the upper part should be close to the inner edge of the wall panel The position is not easy to change.

Warp shaft holder of loom B1

One warp shaft holder B1 and B2 are installed on both sides of the back of the loom. After installation, it is necessary to check the left and right levels of the two supports, and the allowable difference is 0.08/150 mm (the level is calibrated with the warp beam setting gauge).

Textile accessories B2

The failure of let off device is the root of cloud weaving, warp shrinkage and other defects. As for let off self-locking, it is necessary to turn the crank shaft to the flat heald position near the upper center before inspection, loosen the screw on B10 of the B1 or B2 warp shaft support foot, turn up the lap up, pull back the weaving shaft slightly, so that the B7 disc tooth disengages from the let off shaft gear B6, and loosen the warp yarn on the weaving shaft by about 0.6 M.

Textile machine accessories B1

The two people lift down the weaving shaft of the loom and move it about 0.5m to the inner side of the machine, and then push the warp yarn on the back beam C28 to the inner side of the machine with clean looping, so as to expose the warp let off side shaft and other parts.

Textile ductile iron parts B2

The single weight of warp beam bracket B1 and loom ductile iron B2 is 1.3KG, and the material is nodular iron QT. The overall length is 22.3cm, the width is 17cm, the thickness is 4.1cm, and the diameter of the inner hole of the lap screw is 13.5mm. If the textile enterprises need to purchase the ductile iron parts B1 and B2, please contact our company!

FriendLink: BaiDu  Ecer  Xinda Textile  Ec21  Ecplaza  Chinatexnet  Every China  
Copyright © 2016 Xinxiang City Xinda Textile Machinery Parts Co. Ltd 【MANAGE】
ADDRESS:5F West, Unit 53A, Zone A, Huicheng Port Bay, Huixian City, Henan Province,China CONTACT:Mr Yang MOBILE:86-15237383444
TEL:+86-0373-6235050 FAX:+86-0373-6235050 E-MAIL:309816745@qq.com
WEB:http://www.fcbergquistphotos.com
SERVICE
CUSTOMER ONE:
點(diǎn)擊這里
CUSTOMER TWO:
點(diǎn)擊這里
TEL:0373-6235050